Perfect Flex
Many skaters believe that a stiffer frame is better, however, that is not the case. A frame needs a slight amount of flex in various areas in order to help you turn and to stop the frame skipping at the end of the push. A slight amount of flex near the wheels adds grip at the end of your push. The 3PF frame as been engineered with just the right amount of flex.
2 and 3 Point
The 3PF frame can be attached to a 195mm 2 point boot or our new 195mm 3 point boots. This gives you the most flexibility of any frame available to mix and match a setup that suits your needs. For example, indoor skaters want the flexibility of a 2 point frame whereas road skaters want the strength of a 3 point.
Frame Length
The 3PF frame comes in 2 lengths. 13.2" 4x110mm or 12.8" 4x100mm that will fit 105mm wheels.
Frame Specifications
Mounting: 2 point 195mm, 3 point 195mm
Deck Height: Front 48.5 Rear 59.5 (center axle to top of frame)
Made in: Taiwan
Weight
The 110mm frame weighs in at an incredible 190g which is extremely light weight for the strength of the frame.
7050 T6 Aluminum
7075 is an Aerospace aluminum alloy. It is the premier choice for aerospace applications requiring the best combination of strength, stress corrosion cracking resistance and toughness. 7050 exhibits better toughness/corrosion resistance characteristics than 7075. T6 - means that the 3PF frame has been solution heat treated and then artificially aged. This tempering process greatly increases the hardness of the metal. The extrusion must be held in a special jig while it is tempered to strop it from twisting.
Computer Aided Stress Testing
Bont employs the most advanced computer aided frame stress testing on the market. This ensures that every part of the frame is strong enough to withstand month after month of skating without suffering metal fatigue which is a popular cause of frame breakage. The design was then tested in our 3D simulator which tests the frames strengths and weaknesses in a real skating simulation. The design was tweaked and re-tested. The 3PF design went through over 200 days of virtual testing and tweaking before the first frame was crafted.
CNC Precision Machining
The 3PF is machined using precision CNC machines. This ensures that the bearing mounts are perfectly flat and the axles line up perfectly. All important factors in ensuring the highest roll possible.
Axles
The axles are made of 7075 Aluminum to ensure that they never strip.
Merker | Bont |
---|---|
Diameter | 100 mm, 110 mm |
Delivery Time | 5-7 Days |
Pris | kr 3 383,37 |
Call For Price | Nei |
Questions:
There are no product questions yet.
-
Bont Vaypor
Vanlig pris:
Special Price
-
Bont Mounting Bolt
-
Bont Frame Axle
-
Bont Electronic Bearing Cleaner